Nerd Crafts: 3D Glasses Hair Clip

I found a 3D glasses hair clip that I ADORED on Etsy and wanted to use for my 10th Doctor SDCC cosplay.  But it was $16!  Then I had a moment of inspiration and was like maybe I could make it myself!  So here we go!

Supplies:

*3 pieces of felt {red, white, blue}

*Sharp Scissors

*Pencil

*Glue Gun

I bought the felt at Michaels for a total of $1.70!  I purchased gitter white and regular blue and red.  I found that the more stiff felts were easier to work with.

I stayed as much to the sharp corners as I could when cutting to get straight lines.  Then folded very slightly in half to find the middle to cut the nose hole.

I then measured how large I wanted the colored portions to be.  I ended u going with 1 1/2 inches by 1 inch.

When cutting out the eye pieces I made the slightly bigger to have room for shaping.

I had an extra hair clip lying around so I used that.  The pack was originally $3.79 for two clips.  I glued on the eye pieces to the non-penciled side.  Let dry for a moment then glued onto the clip.  I then flipped the clip over and pressed down so it got a good seal.

This total DIY cost only $1.70 since I already had the clip!  I was even able make 13 more!  I just had to purchase more clips!  I cannot WAIT to use this for my 10th Doctor cosplay at SDCC this year!!!!